Vessel controls

Device controls on a vessel page: its systems, and the water sampler during a station. Every command waits on the vessel; stopping asks first; anything that uses up a sample is a hold.

Otter Pro

One row per system: what it is and how it's doing on the left, its control on the right. The bilge pump runs for 3 minutes and stops by itself. The thrusters are under local control, so they show their state but can't be switched from here.

Otter Pro Online, updated 2 s ago Battery 41 %
  • Generator

    4,1 kW, 1 280 engine hours

    Running
  • Bilge pump

    Last ran 06:40, 3 min

    Stopped
  • Thrusters

    Local control on the vessel, 860 rpm

    Running
  • Lights and camera

    Nav lights are on from sunset to sunrise

Water sampler

At a station: send the hose to depth, pick the slot the schedule planned for it, hold to take the sample. The run reports each step; the slot grid shows what's filled, what's planned and what failed.

Winch

Idle
10,0 m hose depth

Steps of 0,5 m; hold Option for 0,1 m. Hold Go to move the winch, so a stray click doesn't send the hose down. Stop acts at once.

Slots

3 of 23 filled
  • Planned
  • Free
  • Filled
  • Partly filled
  • Failed
  • Cleaning

Slot 5 2000 ml

B2 Ytre, 15,0 m, nutrients

Hose at 10,0 m, 5 planned for 15,0 m

Log

  1. Hose at 10,0 m

  2. Slot 4: no flow at 15,0 m

  3. Slot 3 filled at 10,0 m

  4. Slot 2 filled at 5,0 m

  5. Slot 1 filled at 1,0 m

  6. Health check passed